Qdecoder 117, ZA1-16, Light, switch and signal decoder with 16 independently programmable function outputs

Light, switch and signal decoder with 16 independently programmable function outputs (with different light effects).

The Qdecoder ZA1-16 is a light, switch and signal decoder for

8 magnetic switch and signal drives

16 lamps with different light effects

Fluorescent tube - also defective

Gas lantern

Welding light

Round luminaire

Bearing fire

Random flash light

Random flashing light

...

16 lamps in light signals

Red Green

Block signals

Red - green - yellow

(E.g. Signals in the Ks system

Red - green - green / yellow

(E.g. Signals in the Hp system

Hp main control signals with 5 lamps (extension signals with shunting signal)

Vr pre-signals (2x green, 2x yellow)

Combinations of Hp main signal and Vr pre-signal at a signal mast

The address can be set individually for each connected component.

For each output, flash, pulse or continuous operation can be set individually with flashing times between 0.02 seconds and 11 minutes

Each output can be individually dimmed.

13 outputs provide precision dimming with 30,000 to 60,000 dimming stages

The dimming frequency can be set between 1 Hz and 60 kHz for every four outputs.

DCC or Märklin / Motorola

2 A currents with switching tips up to 4 A are supported.

Programming via configuration variables

Measurements: 100x60x18mm

Light signals can be switched with the ZA1-16. However, the "super" functions of the all-rounder, such as, for example, dark keys and the phantom signal images of the relay technology are missing.

The deLuxe version of the Qdecoder ZA1-16 (QD118) offers screwed terminals and facilitates assembly.

The Qdecoder ZA1-16 + (QD123) implements perfect signal control with direct support for all signal systems.

The Qdecoder ZA1-16 + also offers automatic sequence control, pushbutton operation of signals (for use on analogue operated railways) as well as a freely programmable function generator.

Please also use the Qdecoder ZA1-16 + or the Qdecoder ZA3 with Servomodul for 16 (QD132) or 8 servos (QD131) for turnouts with servomotor. A relay module for the polarization of switch points is also available for the ZA3.