Krois-Modell KS1000, KS signal 1: 120 on the left

The KS signal system (Ks stands for combination signal) has been used since 1993 at the former German Federal Railroad and the German Reichsbahn. Signals are used that combine the pre- and / or main signal function in a signal screen.Description:The signal consists of 3D printing, brass, plastic parts.Thanks to its state-of-the-art printing technology, the sideloader is just as exemplary.The LEDs are already fitted with series resistors.The blue cable is a common plus, the other cable colors are the light colors.The construction of the signal is very filigran, the main mast is as in the example steps as well as the ladder in the finest resolution, the two maintenance baskets on the signal are transparent on the ground.The lattice mast and the additional brackets provided for this purpose are in the finest 3D printing.Special feature of the signal are the reflective signs on the mast, which are only attached.For the operation of the signal, we recommend Q-decoder, Z1-16 + or Z1-16 signal.The additional indicators can be selected as follows:Indicator white: 3-15 gives the speed from this signal or A-Z except Q, X, Y, Ä, Ö, Ü, ß, or 16, 17.Pre-indicator yellow: 3-15 gives the speed from the next signal or A-Z except Q, X, Y, Ä, Ö, Ü, ß.Additional indicator: A-Z except Q, X, Y, Ä, Ö, Ü, ß, or 18, 19, 20, 21, 22.You simply enter the number or the letter in the corresponding boxes.Content:1x signal1x Signs1x Indusi

Connector

blue wire common plus

Cable color gives lamp color